ME0D00E1KB71 (1-Port 400GBase-QSFP-DD + 2-Port External OA Flexible Card(BP1T))
| Item | Details |
|---|---|
| Description | 1-Port 400GBase-QSFP-DD + 2-Port External OA Flexible Card(BP1T) |
| Part Number | 03034XTC |
| Model | ME0D00E1KB71 |
| Card type | Flexible Card |
| Silkscreen | BP1T-1×400GBase-QSFP-DD-2×OA-QSFP28 |
| Functions and Features | Description |
|---|---|
| Basic function | Supports one 400G interface for line-rate forwarding and provides two interfaces that can use optical amplifier modules for long-haul transmission. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
1. When the board works with the 02312HCM, 02312YQG, 02313GRH, 02313LHH, or 02313GSB optical module, the short-term operating temperature range supported by the optical module is –5°C to +50°C (23°F to 122°F). 2. The default rate of a QSFP-DD port is 400 Gbit/s, and each QSFP-DD port supports 400GE/100GE. If the transmission rate of a QSFP-DD optical module does not match the default rate, you can run the port split command to switch the transmission rate. 3. When a 400G port uses an 80–120 km long-haul module, it is recommended that one or two OA modules be used based on the actual link insertion loss. For details, see the description of 02313JCM. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported |
No Check whether the corresponding FPIC motherboard supports MACsec. |
| RTU supported | No |
| Functions and Features | Description |
|---|---|
| Basic function | Supports one 400G interface for line-rate forwarding and provides two interfaces that can use optical amplifier modules for long-haul transmission. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
1. When the board works with the 02312HCM, 02312YQG, 02313GRH, 02313LHH, or 02313GSB optical module, the short-term operating temperature range supported by the optical module is –5°C to +50°C (23°F to 122°F). 2. The default rate of a QSFP-DD port is 400 Gbit/s, and each QSFP-DD port supports 400GE/100GE. If the transmission rate of a QSFP-DD optical module does not match the default rate, you can run the port split command to switch the transmission rate. 3. When a 400G port uses an 80–120 km long-haul module, it is recommended that one or two OA modules be used based on the actual link insertion loss. For details, see the description of 02313JCM. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported |
No Check whether the corresponding FPIC motherboard supports MACsec. |
| RTU supported | No |
