ME0D00L1NB72 (03034MCS-001: 2-Port 50GBase/1-Port 100GBase-QSFP28 Flexible Card(BP245))
| Item | Details |
|---|---|
| Description | 2-Port 50GBase/1-Port 100GBase-QSFP28 Flexible Card(BP245) |
| Part Number | 03034MCS-001 |
| Model | ME0D00L1NB72 |
| Card type | Flexible Card |
| Silkscreen | BP245-2×50/1×100GBase-QSFP28 |
| Functions and Features | Description |
|---|---|
| Basic function | Provides two 50G interfaces or one 100G interface for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
1. Port 0 can work in 100GE, 50GE, 40GE, 4x25GE breakout, or 4x10GE breakout mode, and port 1 can work only in 50GE mode. You can run the port-speed command to switch the mode to 50GE or 100GE, or run the port split command to switch the mode to 40GE, 4x25GE breakout, or 4x10GE breakout. 2. If port 0 works in 4x10GE breakout/4x25GE breakout/40GE/100GE mode, port 1 cannot work in 50GE mode. If port 0 works in 50GE mode, port 1 can work in 50GE mode. 3. 10GE WAN ports support only the master mode. The default transmission rate of a port on the subcard is 50 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. 4. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
| Functions and Features | Description |
|---|---|
| Basic function | Provides two 50G interfaces or one 100G interface for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
1. Port 0 can work in 100GE, 50GE, 40GE, 4x25GE breakout, or 4x10GE breakout mode, and port 1 can work only in 50GE mode. You can run the port-speed command to switch the mode to 50GE or 100GE, or run the port split command to switch the mode to 40GE, 4x25GE breakout, or 4x10GE breakout. 2. If port 0 works in 4x10GE breakout/4x25GE breakout/40GE/100GE mode, port 1 cannot work in 50GE mode. If port 0 works in 50GE mode, port 1 can work in 50GE mode. 3. 10GE WAN ports support only the master mode. The default transmission rate of a port on the subcard is 50 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. 4. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
