ME0M0E2NFB7B (2-Port 100GBase-QSFP28 Flexible Card A(BP486-A))
| Item | Details |
|---|---|
| Description | 2-Port 100GBase-QSFP28 Flexible Card A(BP486-A) |
| Part Number | 03034XRV |
| Model | ME0M0E2NFB7B |
| Card type | Flexible Card |
| Silkscreen | BP486-2×100GBase-QSFP28 |
| Functions and Features | Description |
|---|---|
| Basic function | Provides two 100G interfaces for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
1. An interface can work in 4 x 10GE breakout, 40GE, 50GE, or 100GE mode. By default, the interface works in 100GE mode. You can run the port-speed command to switch the interface mode to 50GE/100GE or run the port split command to switch the interface mode to 40GE or 4 x 10GE breakout mode. 2. The four 10GE interfaces split from the same QSFP+ interface must work in 10GE LAN mode. The default transmission rate of an interface on the subcard is 100 Gbit/s. If the transmission rate of the used optical module does not match the default rate (for example, a 40 Gbit/s optical module is used), run the port split command to enable the interface splitting function. 3. When the board is used with the 02312NCX or 02312MLF optical module, the long-term operating temperature of the optical module ranges from 0°C to 45°C. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported |
No Check whether the corresponding FPIC motherboard supports MACsec. |
| RTU supported | No |
| Functions and Features | Description |
|---|---|
| Basic function | Provides two 100G interfaces for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
1. An interface can work in 4 x 10GE breakout, 40GE, 50GE, or 100GE mode. By default, the interface works in 100GE mode. You can run the port-speed command to switch the interface mode to 50GE/100GE or run the port split command to switch the interface mode to 40GE or 4 x 10GE breakout mode. 2. The four 10GE interfaces split from the same QSFP+ interface must work in 10GE LAN mode. The default transmission rate of an interface on the subcard is 100 Gbit/s. If the transmission rate of the used optical module does not match the default rate (for example, a 40 Gbit/s optical module is used), run the port split command to enable the interface splitting function. 3. When the board is used with the 02312NCX or 02312MLF optical module, the long-term operating temperature of the optical module ranges from 0°C to 45°C. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported |
No Check whether the corresponding FPIC motherboard supports MACsec. |
| RTU supported | No |
