ME0D00E1ND74 (03034CPR: 1-Port 100GBase-QSFP28 Flexible Card E(BP240-E))
| Item | Details |
|---|---|
| Description | 1-Port 100GBase-QSFP28 Flexible Card E(BP240-E) |
| Part Number | 03034CPR |
| Model | ME0D00E1ND74 |
| Card type | Flexible Card |
| Silkscreen | BP240-1x100GBase-QSFP28-E |
| Functions and Features | Description |
|---|---|
| Basic function | Provides one 100G interface for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
Supports 1 x 40 Gbit/s and 4 x 10 Gbit/s hash. The default mode is 1 x 10 Gbit/s. LAN/WAN switchover is not supported in 10G mode. When a 10G port works in WAN mode, only the master mode can be used. The slave mode is not supported. The default transmission rate of an interface on the subcard is 100 Gbit/s. If the transmission rate of an interface supported by an optical module (for example, a 40 Gbit/s optical module) does not match the default transmission rate, run the port split command to enable the hash interface function. When the board is used with the 02312NCX optical module, the long-term operating temperature of the optical module ranges from 0°C to 45°C. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
| Functions and Features | Description |
|---|---|
| Basic function | Provides one 100G interface for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
Supports 1 x 40 Gbit/s and 4 x 10 Gbit/s hash. The default mode is 1 x 10 Gbit/s. LAN/WAN switchover is not supported in 10G mode. When a 10G port works in WAN mode, only the master mode can be used. The slave mode is not supported. The default transmission rate of an interface on the subcard is 100 Gbit/s. If the transmission rate of an interface supported by an optical module (for example, a 40 Gbit/s optical module) does not match the default transmission rate, run the port split command to enable the hash interface function. When the board is used with the 02312NCX optical module, the long-term operating temperature of the optical module ranges from 0°C to 45°C. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
