To configure and check the status of the CATV port on the Huawei HG8247H5 ONT via a Huawei OLT, you need to use the OLT's command-line interface (CLI). The CATV (RF video) port is used for analog or digital TV services, and enabling it requires the appropriate configuration on both the OLT and ONT.

Please refer to the following guide to check one-by-one.

Step 1: Log into the Huawei OLT and check OLT and ONT version

VERSION : MA5600V800R015C00
PATCH : SPC105
PRODUCT : MA5680T

MA5680T(config-if-gpon-0/0)#display ont version 0 0
F/S/P : 0/0/0
ONT-ID : 0
Vendor-ID : HWTC
ONT Version : 12E7.A
Product-ID : 12e
Equipment-ID : HG8247H5
OntProductDescription : EchoLife HG8247H5 GPON Terminal (CLASS B+/PRODU

Step 2: Check ONT port state

MA5680T(config-if-gpon-0/0)#

MA5680T(config)#interface gpon 0/0

MA5680T(config-if-gpon-0/0)#display ont port state 0 0 catv-port all
ONT-ID ONT port-ID ONT Port-type LinkState
0 1 CATV up

MA5680T(config-if-gpon-0/0)#display ont port state 0 0 eth-port all
ONT-ID ONT ONT Speed(Mbps) Duplex LinkState RingStatus
port-ID Port-type
0 1 GE - - down -
0 2 FE - - down -
0 3 FE - - down -
0 4 FE - - down -

Step 3: Check ONT CATV port state

MA5680T(config-if-gpon-0/0)#display ont port attribute 0 0 catv
{ <cr>|ont-portid<U><1,8> }:

Command:
display ont port attribute 0 0 catv
ONT ONT ONT Port Frequency
port-ID port-type switch
0 1 CATV on all-pass
0 2 CATV on all-pass
0 3 CATV on all-pass
0 4 CATV on all-pass
0 5 CATV on all-pass
0 6 CATV on all-pass
0 7 CATV on all-pass
0 8 CATV on all-pass

Step 4: Check ONT port attribute

MA5680T(config-if-gpon-0/0)#

MA5680T(config-if-gpon-0/0)#ont port attribute 0 0 catv 1 operational-state off

MA5680T(config-if-gpon-0/0)#display ont port attribute 0 0 catv

{ <cr>|ont-portid<U><1,8> }:

Command:
display ont port attribute 0 0 catv
ONT ONT ONT Port Frequency
port-ID port-type switch
0 1 CATV off all-pass
0 2 CATV on all-pass
0 3 CATV on all-pass
0 4 CATV on all-pass
0 5 CATV on all-pass
0 6 CATV on all-pass
0 7 CATV on all-pass
0 8 CATV on all-pass
MA5680T(config-if-gpon-0/0)#display ont port state 0 0 catv-port all
ONT-ID ONT port-ID ONT Port-type LinkState
0 1 CATV down
MA5680T(config-if-gpon-0/0)#display ont port state 0 0 catv-port all

ONT-ID ONT port-ID ONT Port-type LinkState
0 1 CATV down
MA5680T(config-if-gpon-0/0)#

Troubleshooting Reminder:

· If the CATV port is not working, ensure that the CATV optical signal is being correctly transmitted from the OLT and that the ONT is receiving it.
· You can check the optical power levels for the CATV signal to diagnose any signal issues.

 If you need more specific configuration guidance on Huawei CATV ONT or any adjustments for your configuration, please email us at sales@xponshop.com.