How to configure Wi-Fi services through the NMS?
This blog describes how to configure the GPON terminal WiFi access service through the Huawei NMS (U2000).
Prerequisites
- The user has the admin authority or higher.
- The Huawei OLT and the NMS can communicate with each other properly.
- The NMS is able to discover an online ONT and Internet access services are configured.
Procedure
1. In the Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.
2. Choose GPON > GPON Management from the navigation tree.
3. On the GPON ONU tab page, set the filter criteria or click to display the GPON ONUs.
4. Select an ONT in the normal state, right-click the ONT, and choose maintain ONT.
5. On the navigation tree wifi configuration,click Query query information about SSIDs created for this ONT. Select a specified SSID to query information about Configuration in Detail, Advance Configuration, Authentication Configuration, as shown in the following figure.
a. Configuration in Detail:Select a specified SSID, modify corresponding configuration items, and click Config to the device.
Parameter |
Description |
---|---|
SSID name |
Indicates the name of a wireless network. It is used to distinguish different wireless networks. It consists of a maximum of 32 characters, excluding Tab characters. |
Enable SSID |
Indicates whether to activate a connection. |
Associated Device Nubmer |
Specifies the number of connected wireless terminals. Range: 1-32. |
Broadcast SSID |
Enables or disables the SSID broadcast function.
|
WMM Enable |
Enables or disables multimedia. |
Select a specified SSID, modify corresponding configuration items, and click Config to the device.
Parameter |
Description |
---|---|
Transmitting Power |
Indicates the Tx power of wireless signals. Options: 20%, 40%, 60%, 80%, and 100%. A larger value indicates better coverage of wireless signals. |
Regulatory Domin |
Indicates the country code of a wireless network. |
Channel |
Indicates the channel of a wireless network. The channel varies with the value of region. |
Channel Width |
Indicates the length of a wireless frequency band. Options: auto 20/40 MHz, 20 MHz, and 40 MHz. |
Mode |
Indicates the supported wireless network mode. Options: 802.11b, 802.11g, 802.11b/g, or 802.11b/g/n. |
Select a specified SSID, modify corresponding configuration items, and click Config to the device.
Parameter |
Description |
---|---|
Authentication Mode |
Indicates the authentication mode for a wireless terminal to request access to a wireless network. Options: Open, Shared, WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2 Pre-Shared Key, WPA Enterprise, WPA2 Enterprise, and WPA/WPA2 Enterprise. The default value is Open, which indicates that a wireless terminal can access the network without authentication. |
Encryption Mode |
Indicates the encryption mode for a wireless terminal to request access to a wireless network. The encryption mode and encryption parameters vary with the authentication mode.
|
· NMS don't support to new and delete SSID.
· For Wi-Fi password change through the NMS, the carrir needs to formulate managmenet rights with end uers.