ME0D0E1NDB70 (1-Port 100GBase-QSFP28 Flexible Card(BP100))
| Item | Details |
|---|---|
| Description | 1-Port 100GBase-QSFP28 Flexible Card(BP100) |
| Part Number | 03032HGH |
| Model | ME0D0E1NDB70 |
| Card type | Flexible Card |
| Silkscreen | BP100-1x100GBase-QSFP28-A |
| Functions and Features | Description |
|---|---|
| Basic function | Provides one 100GE interface for line-rate transmitting and receiving. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | The four 10G ports split from the same port must all work in LAN or WAN mode. The 10G ports working in WAN mode support only the master clock mode and not the slave clock mode. The default transmission rate of a port on the subcard is 100 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
| Link protocol | - |
| Functions and Features | Description |
|---|---|
| Basic function | Provides one 100GE interface for line-rate transmitting and receiving. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | The four 10G ports split from the same port must all work in LAN or WAN mode. The 10G ports working in WAN mode support only the master clock mode and not the slave clock mode. The default transmission rate of a port on the subcard is 100 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
| Link protocol | - |
