CR5D0E5XMF94 (03033GDR-001: 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC))
| Item | Details |
|---|---|
| Description | 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC) |
| Part Number | 03033GDR-001 |
| Model | CR5D0E5XMF94 |
| Card type | Interface Card |
| Silkscreen | 2x50GE-QSFP28 |
| Functions and Features | Description |
|---|---|
| Basic function |
Occupies one FPIC slot. Provides two 50GE ports or one 100GE port for line-rate transmitting and receiving, and supports QSFP28 optical modules. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
Port 0 supports 100GE, 50GE, 40GE, 4*25GE (breakout), and 4*10GE (breakout). Port 1 takes effect only when port 0 is a 50GE port. The two pots in a port group {50GE|100GE port 0, 50GE port 1} share the 100GE bandwidth. If port 0 has the switch-mode auto command configured: When a 100G module is installed on port 0: If the 50GE port is down, the 50GE port is deleted and the 50GE|100GE port switches to the 100GE mode. If the 50GE port is up, the 50GE|100GE port remains in 50GE mode and an optical module mismatch alarm is reported. When a 50G module is installed on port 0: Port 0 and port 1 both take effect, and port 0 automatically switches to the 50GE mode through auto-negotiation. When a 40G module is installed on port 0: Port 0 automatically switches to the 40GE mode through auto-negotiation. In this case, port 0 takes effect, but port 1 does not. If the device or subcard resets when a 100G module is installed on port 0 and a 50G module is installed on port 1, the bandwidth effective mode cannot be guaranteed after the reset. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | Supports 40GE/50GE/100GE auto-sensing. |
| FlexE supported |
Yes Physical ports 0 and 1 can be added to the same FlexE group. port-id ranges from 129 to 148 and from 1000 to 3000. Such a FlexE group supports a maximum of 20 FlexE clients. |
| MACsec supported |
Yes Both main interfaces and their sub-interfaces support encryption and decryption. A maximum of 128 interfaces can perform encryption and decryption. |
| RTU supported | No |
| Functions and Features | Description |
|---|---|
| Basic function |
Occupies one FPIC slot. Provides two 50GE ports or one 100GE port for line-rate transmitting and receiving, and supports QSFP28 optical modules. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
Port 0 supports 100GE, 50GE, 40GE, 4*25GE (breakout), and 4*10GE (breakout). Port 1 takes effect only when port 0 is a 50GE port. The two pots in a port group {50GE|100GE port 0, 50GE port 1} share the 100GE bandwidth. If port 0 has the switch-mode auto command configured: When a 100G module is installed on port 0: If the 50GE port is down, the 50GE port is deleted and the 50GE|100GE port switches to the 100GE mode. If the 50GE port is up, the 50GE|100GE port remains in 50GE mode and an optical module mismatch alarm is reported. When a 50G module is installed on port 0: Port 0 and port 1 both take effect, and port 0 automatically switches to the 50GE mode through auto-negotiation. When a 40G module is installed on port 0: Port 0 automatically switches to the 40GE mode through auto-negotiation. In this case, port 0 takes effect, but port 1 does not. If the device or subcard resets when a 100G module is installed on port 0 and a 50G module is installed on port 1, the bandwidth effective mode cannot be guaranteed after the reset. |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | Supports 40GE/50GE/100GE auto-sensing. |
| FlexE supported |
Yes Physical ports 0 and 1 can be added to the same FlexE group. port-id ranges from 129 to 148 and from 1000 to 3000. Such a FlexE group supports a maximum of 20 FlexE clients. |
| MACsec supported |
Yes Both main interfaces and their sub-interfaces support encryption and decryption. A maximum of 128 interfaces can perform encryption and decryption. |
| RTU supported | No |
