Huawei S5720-52X-PWR-SI-AC switch with 48-port 1000BASE-T POE+, 4-port 10GE SFP+, 2 power slots
Forwarding performance: 132 Mpps
Switching capacity: 336Gbps
16K MAC address entries
POE supported
Huawei S5720-SI Flexible Gigabit Ethernet switches that provide resilient, high-density Layer 3 switching for data centers. Features include multiple-terminals, HD video security, and video conferencing applications. Intelligent iStack clustering, 10 Gbit/s upstream ports and IPv6 forwarding enable use as aggregation switches in enterprise campus networks.
Next-generation reliability, security, and energy-saving technologies make S5720-SI Series Switches easy to install and maintain, and an excellent source of low Total Cost of Ownership (TCO).
| Item | Description |
| Fixed port | 48*Ethernet 10/100/1000 PoE+ ports, 4*10 Gig SFP+ |
| Forwarding performance | 132Mpps |
| Extended slot | NA |
| MAC address table | IEEE 802.1d compliance |
| 16K MAC address entries | |
| MAC address learning and aging | |
| Static, dynamic, and black hole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| VLAN | 4K VLANs |
| Guest VLAN and voice VLAN | |
| GVRP | |
| MUX VLAN | |
| VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
| 1:1 and N:1 VLAN mapping | |
| Jumbo frame | 10K |
| Ring protection | RRPP ring topology and RRPP multi-instance |
| Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
|
| SEP, ERPS(G.8032) | |
| STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) | |
| BPDU protection, root protection, and loop protection | |
| IP routing | Static route, RIPv1, RIPv2, RIPng, ECMP, OSPF, OSPFv3, BGP, BGP4+, ISIS, ISISv6, VRRP, VRRP6 |
| IPv6 features | Neighbor Discovery (ND) |
| Path MTU (PMTU), MLD v1/v2 snooping | |
| IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
| 6 to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
| ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
| 6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
| Multicast forwarding | PIM DM, PIM SM, PIM SSM |
| IGMP v1/v2/v3 snooping and IGMP fast leave | |
| Multicast forwarding in a VLAN and multicast replication between VLANs | |
| Multicast load balancing among member ports of a trunk | |
| Controllable multicast | |
| Port-based multicast traffic statistics | |
| QoS/ACL | Rate limiting on packets sent and received by an interface |
| Packet redirection | |
| Port-based traffic policing and two-rate three-color CAR | |
| Eight queues on each port | |
| WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
| Re-marking of the 802.1p priority and DSCP priority | |
| Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source | |
| MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
| Rate limiting in each queue and traffic shaping on ports | |
| Security | User privilege management and password protection |
| DoS attack defense, ARP attack defense, and ICMP attack defense | |
| Binding of the IP address, MAC address, interface, and VLAN | |
| Port isolation, port security, and sticky MAC | |
| Blackhole MAC address entries | |
| MAC Forced Forwarding (MFF) | |
| Limit on the number of learned MAC addresses | |
| 802.1x authentication and limit on the number of users on an interface | |
| AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 |
|
| Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist | |
| 802.1x authentication, MAC address authentication, and combined authentication on a per port basi |
|
| Portal authentication on a per VLANIF interface basis, MACSec(hardware ready) | |
| OAM | Software OAM: |
| EFM OAM | |
| CFM OAM | |
| CFM OAM | |
| Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration |
| Automatically loading the system software package and patches of clients | |
| One-click and automatic delivery of service configurations | |
| Supports independent running client | |
| Management and Maintenance |
iStack, Virtual cable test, SNMP v1/v2c/v3, RMON |
| Web-based NMS | |
| System logs and alarms of different levels | |
| sFlow | |
| LLDP/LLDP-MED | |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
| Supports LNP (Similar to DTP) | |
| Supports VCMP (Similar to VTP) | |
| Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃ 1800-5000 m altitude: The operating temperature reduces by 1℃ every time the altitude increases by 220 m. Relative humidity: 5% to 95% (non-condensing) |
| Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz |
| Dimensions (mm) | 442 (W) x 420 (D)x 43.6 (H) |
| Typical power consumption |
without PD: 51W; with PD: |
| PN. | 02350DLX |
