MA5801-GP08-H2 GPON OLT with 8 x GPON port, 4 x GE/10GE upstream ports, AC/DC power supply
The SmartAX MA5801-GP08-H2 is a compact and low-density box-shaped OLT. It provides multiple fiber to the home Huawei FTTH solution to meet the requirements of economical and efficient network construction.
System switching capacity: 110 Gbit/s
The lightweight OLT weighs less than 5 kg and occupies 1 U installation space. It can be flexibly adapted to various scenarios.
Supports dual AC or DC power supplies, providing flexible power supply and high reliability.
The matching small outdoor cabinet can be installed on a pole, tower, or wall, facilitating installation and reducing engineering costs.
| Item | Product Specifications |
| Dimensions (H x W x D) | Excluding mounting ears: 43.6 mm × 442 mm×220 mm |
| Including IEC mounting ears: 43.6 mm × 482.6 mm × 220 mm | |
| Including ETSI mounting ears: 43.6 mm × 531 mm × 220 mm | |
| Weight (full configuration) | DC power supply: 4.2 kg |
| AC power supply: 4.6 kg | |
| Power supply mode | DC power supply (dual backup) |
| AC power supply (dual backup) | |
| Working voltage range | DC power supply: –38.4 V to –72 V |
| AC power supply: 100 V to 240 V | |
| Rated voltage | DC power supply: –48 V/–60 V |
| AC power supply: 110 V/220 V | |
| Maximum input current | DC power supply: 6 A |
| AC power supply: 2.5 A | |
| Ambient temperature | –40°C to +65°C |
| The device can start up at a lowest temperature of –25°C. | |
| NOTE: | |
| The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack. | |
| Ambient humidity | 5%–95% RH |
| Atmospheric pressure | 70–106 kPa |
| Altitude | < 4000 m. The air density varies with the altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the device varies with the altitude. |
| System switching capacity | 110 Gbit/s |
| MAC addresses | 32768 |
| Access ONT | 1024 |
| IPv4 routing table | 8192 |
| IPv6 routing table | 4096 |
| ARP table | 16384 |
| Bit error rate (BER) in full load | A BER smaller than 10 e-10 for a port that transmits data in full load |
| Upstream ports | 4 GE/10GE |
| Service ports | 8 GPON |
| System reliability specifications | System availability for the typical configuration: > 99.999% |
| Mean time between failures (MTBF): about 61 years | |
| NOTE: | |
| Due to different network environments and different boards used by devices, the preceding MTBF (61 years) of the MA5801 is only for reference. The preceding values are only for reference. For details, contact the related Huawei engineers. | |
| Power consumption | DC power supply: |
| Static power consumption: 46W | |
| Typical power consumption: 64W | |
| Maximum power consumption: 111W | |
| AC power supply: | |
| Static power consumption: 47W | |
| Typical power consumption: 65W | |
| Maximum power consumption: 112W | |
| NOTE: | |
| The power consumption of a product is tested in the following conditions: | |
| Static power consumption: 25°C, no optical module in optical ports, and no service. | |
| Typical power consumption: 25°C, 4 x 10GE(10kM) upstream ports, 8 x GPON(CLASS C+) ports on the user side, full services, and maximum traffic. | |
| Maximum power consumption: 65°C, 4 x 10GE(10kM) upstream ports, 8 x GPON(CLASS C+) ports on the user side, full services, and maximum traffic. | |
