ME0DE2NLEX7C (2-Port 100GBase-QSFP28 + 20-Port 10GBase LAN/WAN-SFP+ Broadband Service Unit Integrated(BSUI-400))
| Item | Details |
|---|---|
| Description | 2-Port 100GBase-QSFP28 + 20-Port 10GBase LAN/WAN-SFP+ Broadband Service Unit Integrated(BSUI-400) |
| Part Number | 03057602 |
| Model | ME0DE2NLEX7C |
| Card type | Fixed Board |
| Silkscreen |
BSUI-400 2x100G-QSFP28-20x10G LAN/WAN-SFP+ |
| Functions and Features | Description |
|---|---|
| Basic function | Supports 400G line-rate forwarding. There are two types of ports. One type supports 2 x 100G interfaces for line-rate forwarding. The other type supports 20 x 10GE interfaces. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
The four 10G ports split from the same port must all work in LAN or WAN mode. The 10G ports working in WAN mode support only the master clock mode and not the slave clock mode. The default transmission rate of a port on the subcard is 100 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
| Link protocol | - |
| Functions and Features | Description |
|---|---|
| Basic function | Supports 400G line-rate forwarding. There are two types of ports. One type supports 2 x 100G interfaces for line-rate forwarding. The other type supports 20 x 10GE interfaces. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
The four 10G ports split from the same port must all work in LAN or WAN mode. The 10G ports working in WAN mode support only the master clock mode and not the slave clock mode. The default transmission rate of a port on the subcard is 100 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
| Link protocol | - |
