ME0D0MPUB771 (Main Processing Unit B7)
| Item | Details |
|---|---|
| Description | Main Processing Unit B7 |
| Part Number | 03058857 |
| Model | ME0D0MPUB771 |
| Card type | MPU |
| Silkscreen | MPUB7 |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| FSP0, FSP1 | RJ45 | Reserved. It functions as an interface for fast chassis switchovers. | 8-core shielded cable |
| 10GE | SFP+ | Reserved cascading interface. | Optical fiber |
| MGMT-ETH | RJ45 | It connects to an NMS and can work in half-duplex or full-duplex mode. | Super category 5 shielded twisted pair |
| CON | RJ45 | Connected to the console for onsite system configuration. The default baud rate is 9600 Baud, and the baud rate is configurable. | 8-core shielded cable |
| AUX | RJ45 | Used to redirect traffic to a serial port of the peer device. The default baud rate is 9600 Baud. | 8-core shielded cable |
| CLK | RJ45 | Used to input or output 2 Mbit/s clock signals, 2 MHz clock signals. | 120-ohm clock cable. If the peer end is an SMB interface, a 120 ohm-75 ohm converter box is required. |
| TOD | RJ45 | Used to input or output 1pps+ASCII time signals, or two channels of DCLS time signals. | 120-ohm clock cable. If the peer end is an SMB interface, a 120 ohm-75 ohm converter box is required. |
| CLK-INT | RJ45 | Used to input or output 2 Mbit/s clock signals, 2 MHz clock signals, 1pps+ASCII time signals, or two channels of DCLS time signals. | 120-ohm clock cable |
| SMA | SMA | Clock test port. | 50-ohm clock cable |
| USB | USB Type A | USB interface, reserved for future use. | - |
| Functions and Features | Description |
|---|---|
| Basic function | Responsible for system control and management, including route calculation, device management and maintenance, and device monitoring. In addition, it functions as the system synchronization unit to provide high-precision and high-reliability synchronization clock and time signals. |
| Reliability and availability |
Hot swapping is supported. The 1:1 backup mode is adopted. |
| Restrictions and remarks | This board cannot be installed in the same chassis as other types of main control boards. |
| Breakout supported | No |
| Interface rate auto-sensing supported | No |
| Link protocol | - |
