ME0M0E2NFB71 (03032LEM-002: 2-Port 100GBase-QSFP28 Flexible Card(BP480))
| Item | Details |
|---|---|
| Description | 2-Port 100GBase-QSFP28 Flexible Card(BP480) |
| Part Number | 03032LEM-002 |
| Model | ME0M0E2NFB71 |
| Card type | Flexible Card |
| Silkscreen | BP480-2×100GBase-QSFP28-A |
| Functions and Features | Description |
|---|---|
| Basic function | Provides two 100GE interfaces for line-rate transmitting and receiving. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | 10G ports that work in WAN mode support only the master clock mode, not the slave clock mode. The default transmission rate of a port on the subcard is 100 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
| Functions and Features | Description |
|---|---|
| Basic function | Provides two 100GE interfaces for line-rate transmitting and receiving. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | 10G ports that work in WAN mode support only the master clock mode, not the slave clock mode. The default transmission rate of a port on the subcard is 100 Gbps. If the transmission rate of the used optical module does not match the default port rate, for example, if a 40G optical module is used, run the port split command on the corresponding port to enable port breakout. When the board works with 02312NCX optical modules, the long-term operating temperature of these optical modules ranges from 0°C to 45°C (32°F to 113°F). |
| Breakout supported |
Yes. To enable the breakout function on a port, run the port split command. |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| MACsec supported | No |
