Huawei S5720-50X-EI-DC Switch
- Brand New Condition
- Original Box Packed
- Latest Firmware Version
- Category:Huawei,Huawei Switch,S5700 Series
Huawei S5720-50X-EI-DC switch with 46-ports 1000BASE-T, 4-ports 10GE SFP+, 2-port QSFP+ dedicated stack, 1 DC power
Forwarding perfomance: 129 Mpps
Switching capacity: 598Gbps
64K MAC address entries
No extension slot
Huawei S5720-EI series provide flexible all-gigabit access and enhanced 10 GE uplink port scalability. They are widely used as access/aggregation switches in enterprise campus networks or gigabit access switches in data centers.
Item | Description |
Fixed port | 46 Ethernet 10/100/1000 ports, 4 10 Gig SFP+, 2 QSFP+ dedicated stack ports |
Forwarding performance | 129 Mpps |
Extended slot | NA |
DRAM and Flash | SDRAM: 2 GB; Flash: 340 MB |
MAC address table | IEEE 802.1d |
64K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN mapping | |
VLAN-based transparent transmission of protocol packets | |
Jumbo frame | 12K |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
|
Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS) | |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | |
BPDU protection, root protection, and loop protection; BPDU tunnel | |
IP routing | Static routing, RIPv1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, and policy-based routing |
16K IPv4 unicast routes, 8K IPv6 unicast routes | |
3K IPv4 static routes, 1K IPv6 static routes | |
IPv6 features | Neighbor Discovery (ND) |
Path maximum transmission unit (PMTU) | |
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types |
|
Multicast Listener Discovery (MLD) v1/v2 snooping | |
Multicast forwarding | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load splitting among trunk member ports | |
Controllable multicast | |
Layer 2 multicast control | |
Port-based multicast traffic statistics collection | |
IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent | |
Multicast Dense Mode (PIM-DM), and Protocol Independent Multicast Source-Specific Multicast (PIM-SSM) | |
Multicast Source Discovery Protocol (MSDP) | |
QoS/ACL | Inbound and outbound traffic rate limiting on a port |
Packet redirection | |
Broadcast storm control | |
Port-based traffic policing and two-rate and three-color CAR | |
Eight queues per port,Weighted round robin (WRR), deficit round robin (DRR), strict priority (SP), WRR+SP, and DRR+SP queue scheduling algorithms | |
Weighted random early detection (WRED) | |
Re-marking of the 802.1p priority and DSCP value of packets | |
Packet filtering based on Layer 2 to Layer 4 information, including source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UCD source/destination ports, protocol types, and VLAN IDs | |
Per queue rate limiting and interface traffic shaping | |
1:1,N:1,N:4 port mirroring; VLAN mirroring | |
Security features |
Hierarchical user management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface number, and VLAN ID of a user | |
Port isolation, port security, and sticky MAC | |
MAC Forced Forwarding (MFF) | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
IEEE 802.1x authentication and the limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense; Blacklist and whitelist; MACSec ready | |
Access security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Client, DHCP Security |
Port aggregation | LACP |
Up to 128 trunk groups | |
Up to 8 member interfaces in each trunk group | |
Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag) |
ITU-Y.1731; BFD for BGP/IS-IS/OSPF/static route | |
Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration |
Automatically loading the system software package and patches of clients | |
One-click and automatic delivery of service configurations | |
Supports independent running client | |
Management and Maintenance |
iStack, Virtual cable test, SNMP v1/v2c/v3, RMON/RMON2 |
Web-based network management system | |
System logs and multi-level alarms | |
sFlow, LLDP/LLDP-MED, 802.3az EEE | |
SCP (Secure Copy Protocol), TFTP, FTP | |
Store dual software images and configuration files | |
Interoperability | VLAN-based Spanning Tree (working with PVST/PVST+/RPVST) |
Link-type Negotiation Protocol (LNP), similar to the Dynamic Trunking Protocol (DTP) | |
VLAN Central Management Protocol (VCMP), similar to the VLAN Trunk Protocol (VTP) | |
Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃ 1800-5000m altitude: The operating temperature reduces by 1℃ every time the altitude increases by 220m. Relative humidity: 5% to 95% (noncondensing) |
Input voltage | DC: Rated voltage range: –48 V to –60 V DC Maximum voltage range: –36 V to –72 V DC |
Dimensions (mm) | 442 (W) x 220 (D)x 43.6 (H) |
Typical power consumption |
47.5W |
PN. | 02350NHD |
Huawei S5720-50X-EI-DC switch with 46-ports 1000BASE-T, 4-ports 10GE SFP+, 2-port QSFP+ dedicated stack, 1 DC power
Forwarding perfomance: 129 Mpps
Switching capacity: 598Gbps
64K MAC address entries
No extension slot
Huawei S5720-EI series provide flexible all-gigabit access and enhanced 10 GE uplink port scalability. They are widely used as access/aggregation switches in enterprise campus networks or gigabit access switches in data centers.
Item | Description |
Fixed port | 46 Ethernet 10/100/1000 ports, 4 10 Gig SFP+, 2 QSFP+ dedicated stack ports |
Forwarding performance | 129 Mpps |
Extended slot | NA |
DRAM and Flash | SDRAM: 2 GB; Flash: 340 MB |
MAC address table | IEEE 802.1d |
64K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN mapping | |
VLAN-based transparent transmission of protocol packets | |
Jumbo frame | 12K |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover |
|
Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS) | |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | |
BPDU protection, root protection, and loop protection; BPDU tunnel | |
IP routing | Static routing, RIPv1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, and policy-based routing |
16K IPv4 unicast routes, 8K IPv6 unicast routes | |
3K IPv4 static routes, 1K IPv6 static routes | |
IPv6 features | Neighbor Discovery (ND) |
Path maximum transmission unit (PMTU) | |
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types |
|
Multicast Listener Discovery (MLD) v1/v2 snooping | |
Multicast forwarding | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load splitting among trunk member ports | |
Controllable multicast | |
Layer 2 multicast control | |
Port-based multicast traffic statistics collection | |
IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent | |
Multicast Dense Mode (PIM-DM), and Protocol Independent Multicast Source-Specific Multicast (PIM-SSM) | |
Multicast Source Discovery Protocol (MSDP) | |
QoS/ACL | Inbound and outbound traffic rate limiting on a port |
Packet redirection | |
Broadcast storm control | |
Port-based traffic policing and two-rate and three-color CAR | |
Eight queues per port,Weighted round robin (WRR), deficit round robin (DRR), strict priority (SP), WRR+SP, and DRR+SP queue scheduling algorithms | |
Weighted random early detection (WRED) | |
Re-marking of the 802.1p priority and DSCP value of packets | |
Packet filtering based on Layer 2 to Layer 4 information, including source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UCD source/destination ports, protocol types, and VLAN IDs | |
Per queue rate limiting and interface traffic shaping | |
1:1,N:1,N:4 port mirroring; VLAN mirroring | |
Security features |
Hierarchical user management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface number, and VLAN ID of a user | |
Port isolation, port security, and sticky MAC | |
MAC Forced Forwarding (MFF) | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
IEEE 802.1x authentication and the limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense; Blacklist and whitelist; MACSec ready | |
Access security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Client, DHCP Security |
Port aggregation | LACP |
Up to 128 trunk groups | |
Up to 8 member interfaces in each trunk group | |
Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag) |
ITU-Y.1731; BFD for BGP/IS-IS/OSPF/static route | |
Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration |
Automatically loading the system software package and patches of clients | |
One-click and automatic delivery of service configurations | |
Supports independent running client | |
Management and Maintenance |
iStack, Virtual cable test, SNMP v1/v2c/v3, RMON/RMON2 |
Web-based network management system | |
System logs and multi-level alarms | |
sFlow, LLDP/LLDP-MED, 802.3az EEE | |
SCP (Secure Copy Protocol), TFTP, FTP | |
Store dual software images and configuration files | |
Interoperability | VLAN-based Spanning Tree (working with PVST/PVST+/RPVST) |
Link-type Negotiation Protocol (LNP), similar to the Dynamic Trunking Protocol (DTP) | |
VLAN Central Management Protocol (VCMP), similar to the VLAN Trunk Protocol (VTP) | |
Operating environment | Operating temperature: 0-1800 m altitude: 0-45℃ 1800-5000m altitude: The operating temperature reduces by 1℃ every time the altitude increases by 220m. Relative humidity: 5% to 95% (noncondensing) |
Input voltage | DC: Rated voltage range: –48 V to –60 V DC Maximum voltage range: –36 V to –72 V DC |
Dimensions (mm) | 442 (W) x 220 (D)x 43.6 (H) |
Typical power consumption |
47.5W |
PN. | 02350NHD |
GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.
Cargo Weight/Volume | Suggested Shipping Ways | Comments |
≤ 45KGS | By Shipping Carriers (DHL, UPS, FedEx, etc.) | Door to door service, fast and convenient. |
>45KGS | By Air Cargo | Door to airport service, more cost-efficient. |
>1CBM | By Sea Freight | Large-volume goods, door to seaport service, longer shipping time but cheaper. |
XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.
RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.