Huawei S5730-60C-HI Switch
- Brand New Condition
- Original Box Packed
- Latest Firmware Version
- Category:Huawei,Huawei Switch,S5700 Series
Huawei S5730-60C-HI switch with 48-port 1000BASE-T, 4-port 10GE SFP+, 2 power slots PN#02351MQR
With 1 extension slot
Switching capacity: 758Gbps
256K MAC address entries
POE Not Supported
Stack ports: 10GE SFP+ ports on the front panel, or 10GE ports or 40GE QSFP+ ports on the rear card
Applicable power modules:
150 W AC power module
150 W DC power module
Rear card slot supported:
ES5D21Q02Q00
ES5D21X08T00
ES5D21X08S00
By converging services and networks, S5730-HI provides the Free Mobility feature to ensure consistent user experience. Its Super Virtual Fabric (SVF) feature virtualizes the entire network into one device for simple management. S5730-HI also provides flexible Ethernet networking options, comprehensive VPN tunnel solutions, various security control methods, intelligent deployment, and simple O&M. As such, S5730-HI is ideal for the access/aggregation layers of large and midsize campus networks and the core layer of campus branches and small campus networks.
| Item | Description |
| Fixed ports | 48×10/100/1000Base-T, 4×10 Gig SFP+ |
| Extended slot | One extended slot,supporting 8x10GE Base-T, 8x10GE SFP+ or 2x40G QSFP+ interface cards |
| Dimensions mm (W×D ×H) | 442×420×44.4 |
| Input voltage | AC:
Rated AC voltage: 100-240 V AC; 50/60 Hz Max AC voltage: 90-264 V AC; 47-63 Hz DC: Rated DC voltage: -48-60 V DC; Max DC voltage: -38.4-72 V DC |
| Maximum power consumption (without card) | 87.7 W |
| Operating temperature | 0-1800 m altitude: 0°C to 45°C 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m. |
| Relative humidity | 5% to 95% (non-condensing) |
| Heat dissipation | Air cooling heat dissipation, intelligent speed adjustment, and pluggable fans |
| MAC address table | IEEE 802.1d standards compliance
256K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
| VLAN | 4K VLANs
Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN mapping |
| Wireless service | AP access control, AP domain management, and AP configuration template management
Radio management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis |
| Ethernet loop protection | RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection |
| MPLS | MPLS L3VPN
MPLS L2VPN (VPWS/VPLS) MPLS-TE MPLS QoS |
| IP routing | Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy |
| Interoperability | VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST
Link-type Negotiation Protocol (LNP), similar to DTP VLAN Central Management Protocol (VCMP), similar to VTP |
| IPv6 features | Neighbor Discover (ND)
PMTU IPv6 Ping, IPv6 Tracert, IPv6 Telnet ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types Multicast Listener Discovery snooping (MLDv1/v2) IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP MVPN |
| QoS/ACL | Rate limitation in the inbound and outbound directions of a port
Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port DRR, SP and DRR+SP queue scheduling algorithms WRED Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Queue-based rate limitation and shaping on ports |
| Security | Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC MAC Forced Forwarding (MFF) Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1x authentication and limit on the number of users on a port AAA authentication, RADIUS authentication, and HWTACACS authentication NAC SSH V2.0 HTTPS CPU protection Blacklist and whitelist Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets Secure Boot IPSec |
| Reliability | LACP
E-trunk Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 DLDP LLDP BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static route |
| VXLAN | Supports VXLAN L2 and L3 gateways
Centralized and distributed gateway BGP-EVPN Configured through the NETCONF protocol |
| Super Virtual Fabric (SVF) | Working as an SVF Parent node to vertically virtualize downlink switches and APs as one device for management. A two-layer client architecture is supported.
IGMP snooping can be enabled on access switches (ASs) and the maximum number of access users on a port can be configured. ASs can be independently configured. Services that are not supported by templates can be configured on the parent. Third-party devices are allowed between SVF parent and clients. Working as an SVF Client node that is plug-and-play with zero configuration |
| iPCA | Directly coloring service packets to collect real-time statistics on the number of lost packets and packet loss ratio
Collection of statistics on the number of lost packets and packet loss ratio at network and device levels |
| TWAMP | Two-way IP link performance measurement
Measurement on two-way packet delay, one-way packet loss rate, and one-way packet jitter |
| Management and maintenance | iStack
Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different levels GVRP MUX VLAN 802.3az Energy Efficient Ethernet (EEE) NetStream Dying gasp upon power-off |
Huawei S5730-60C-HI switch with 48-port 1000BASE-T, 4-port 10GE SFP+, 2 power slots PN#02351MQR
With 1 extension slot
Switching capacity: 758Gbps
256K MAC address entries
POE Not Supported
Stack ports: 10GE SFP+ ports on the front panel, or 10GE ports or 40GE QSFP+ ports on the rear card
Applicable power modules:
150 W AC power module
150 W DC power module
Rear card slot supported:
ES5D21Q02Q00
ES5D21X08T00
ES5D21X08S00
By converging services and networks, S5730-HI provides the Free Mobility feature to ensure consistent user experience. Its Super Virtual Fabric (SVF) feature virtualizes the entire network into one device for simple management. S5730-HI also provides flexible Ethernet networking options, comprehensive VPN tunnel solutions, various security control methods, intelligent deployment, and simple O&M. As such, S5730-HI is ideal for the access/aggregation layers of large and midsize campus networks and the core layer of campus branches and small campus networks.
| Item | Description |
| Fixed ports | 48×10/100/1000Base-T, 4×10 Gig SFP+ |
| Extended slot | One extended slot,supporting 8x10GE Base-T, 8x10GE SFP+ or 2x40G QSFP+ interface cards |
| Dimensions mm (W×D ×H) | 442×420×44.4 |
| Input voltage | AC:
Rated AC voltage: 100-240 V AC; 50/60 Hz Max AC voltage: 90-264 V AC; 47-63 Hz DC: Rated DC voltage: -48-60 V DC; Max DC voltage: -38.4-72 V DC |
| Maximum power consumption (without card) | 87.7 W |
| Operating temperature | 0-1800 m altitude: 0°C to 45°C 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m. |
| Relative humidity | 5% to 95% (non-condensing) |
| Heat dissipation | Air cooling heat dissipation, intelligent speed adjustment, and pluggable fans |
| MAC address table | IEEE 802.1d standards compliance
256K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
| VLAN | 4K VLANs
Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN mapping |
| Wireless service | AP access control, AP domain management, and AP configuration template management
Radio management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis |
| Ethernet loop protection | RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection |
| MPLS | MPLS L3VPN
MPLS L2VPN (VPWS/VPLS) MPLS-TE MPLS QoS |
| IP routing | Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy |
| Interoperability | VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST
Link-type Negotiation Protocol (LNP), similar to DTP VLAN Central Management Protocol (VCMP), similar to VTP |
| IPv6 features | Neighbor Discover (ND)
PMTU IPv6 Ping, IPv6 Tracert, IPv6 Telnet ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types Multicast Listener Discovery snooping (MLDv1/v2) IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP MVPN |
| QoS/ACL | Rate limitation in the inbound and outbound directions of a port
Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port DRR, SP and DRR+SP queue scheduling algorithms WRED Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Queue-based rate limitation and shaping on ports |
| Security | Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC MAC Forced Forwarding (MFF) Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1x authentication and limit on the number of users on a port AAA authentication, RADIUS authentication, and HWTACACS authentication NAC SSH V2.0 HTTPS CPU protection Blacklist and whitelist Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets Secure Boot IPSec |
| Reliability | LACP
E-trunk Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 DLDP LLDP BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static route |
| VXLAN | Supports VXLAN L2 and L3 gateways
Centralized and distributed gateway BGP-EVPN Configured through the NETCONF protocol |
| Super Virtual Fabric (SVF) | Working as an SVF Parent node to vertically virtualize downlink switches and APs as one device for management. A two-layer client architecture is supported.
IGMP snooping can be enabled on access switches (ASs) and the maximum number of access users on a port can be configured. ASs can be independently configured. Services that are not supported by templates can be configured on the parent. Third-party devices are allowed between SVF parent and clients. Working as an SVF Client node that is plug-and-play with zero configuration |
| iPCA | Directly coloring service packets to collect real-time statistics on the number of lost packets and packet loss ratio
Collection of statistics on the number of lost packets and packet loss ratio at network and device levels |
| TWAMP | Two-way IP link performance measurement
Measurement on two-way packet delay, one-way packet loss rate, and one-way packet jitter |
| Management and maintenance | iStack
Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different levels GVRP MUX VLAN 802.3az Energy Efficient Ethernet (EEE) NetStream Dying gasp upon power-off |
GLOBAL SHIPPING
XponShop offers you various options of shipping ways:
-EXW SHENZHEN
-Overseas Express which includes shipping by Carriers, by Air Cargo, and Sea Freight.
| Cargo Weight/Volume | Suggested Shipping Ways | Comments |
| ≤ 45KGS | By Shipping Carriers (DHL, UPS, FedEx, etc.) | Door to door service, fast and convenient. |
| ＞45KGS | By Air Cargo | Door to airport service, more cost-efficient. |
| ＞1CBM | By Sea Freight | Large-volume goods, door to seaport service, longer shipping time but cheaper. |
XponShop makes the most commonly used trade terms available for your convenience: CNF, CPT, CIF, DDP, etc to ensure global fast and convenient delivery.
Once you confirm your order, you may contact XponShop team for calculating the freight charges and choose the optimal shipping way.
NOTE:
· Shipping may be subject to local taxes or duties; XponShop is not responsible for and has no control over these charges.
· No matter which shipping ways you chose, cargo insurance is highly recommended in case of unpredictable loss.
RETURN POLICY
We aim to deliver products for your appreciation and satisfaction. XponShop return or replacement policy applies only if the product is damaged or incorrectly delivered.
–If you receive a damaged product or it is different from the one requested, you can return or replace it within 7 days of receipt. In such a case, costs shall be borne by XponShop.
–If the product is malfunctional during use and under 12 months warranty, XponShop support team will contact you to troubleshoot the issue by professional diagnosis. The unsolvable problem will trigger the return procedure: repair, replace and reship to you or refund if repair or replacement is inapplicable.
NOTE:
· Please be aware that the product must be returned to the specified address as defined by shipping incoterms against the sales invoice/contract.
· For further information about how to return products, please contact our XponShop team at sales@xponshop.com, we will advise you on how to proceed.
Related items
Huawei MA5800-X2 OLT 19inch Chassis
- Brand New Condition
- Latest 3rd-Party ONTs Compatible Firmware Loaded
- Latest Manufacture Year
- 2 Pairs 6mm² Power Cable Included
- Blank Panel Included
Huawei H902GPHF 16-port GPON Board for MA5800 series OLT
- Unified 16*PON Module
- Original Package
- Board and Modules Tested
- Support 9216 bytes (jumbo frame enabled)
Huawei H906CGHF 16-port XG-PON and GPON combo Board for MA5800 series OLT
- Unified 16*PON Module
- Original Package
- Board and Modules Tested
- Support 9216 bytes (jumbo frame enabled)
Huawei HS8145X6 ONT
- Failure rate＜0.2%
- OEM Supported
- Firmware Customized
- Supports OMCI/TR069
Huawei MA5800-X7 OLT 19inch Chassis
- Brand New Condition
- Latest 3rd-Party ONTs Compatible Firmware Loaded
- Latest Manufacture Year
- 2 Pairs 16mm² Power Cable Included
- Blank Panel Included
Huawei H901GPHF 16-port GPON Board for MA5800 series OLT
- Unified 16*PON Module
- Original Package
- Board and Modules Tested
- Support 9216 bytes (jumbo frame enabled)
Huawei EG8145V5 ONT
- Failure rate＜0.2%
- OEM Supported
- Firmware Customized
- Supports OMCI/TR069
Huawei H902CSHF 16-port XGS-PON and GPON combo Board for MA5800 series OLT
- Unified 16*PON Module
- Original Package
- Board and Modules Tested
- Support 9216 bytes (jumbo frame enabled)
Huawei EG8145X6 ONT
- Failure rate＜0.2%
- OEM Supported
- Firmware Customized
- Supports OMCI/TR069
