The H807GPBD board is a 8-port GPON OLT interface board for Huawei SmartAX MA5600T series OLT including the MA5608T, MA5683T and MA5680T. It works together with the ONU to provide the GPON access service.
8 GPON ports (SFP)
Max. split radio:
Class B+: 1: 64
Class C+/C++: 1: 128
Port rate:
Upstream: 1.244 Gbit/s
Downstream: 2.488 Gbit/s
Power budget per GPON port: 
Class B+ (28 dB, most common),
Class C+ (32 dB, long reach transmission)
Class C++: 35 dB
MAC address table size: 8192
Service flows per PON board: 8184
Available DBA bandwidth: 1238784 kbit/s
| Specification | |
| Service ports | |
| GPON Port | 8-GPON Port | 
| GPON SFP Module Specification | |
| Type | C+ Module : One-fiber bi-directional optical module, class C+ | 
| Operating Wavelength | Tx: 1490 nm, Rx: 1310 nm | 
| Encapsulation Type | SFP | 
| Port Rate | Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s | 
| Minimun Output Optical Power | C+ Module : 3.00 dBm | 
| Maximum Output Optical Power | C+ Module : 7.00 dBm | 
| Maximum Receiver Sensitivity | C+ Module : -32.00 dBm | 
| Optical Connector Type | SC/PC | 
| Optical Fiber Type | Single-mode | 
| Reach | 20.00 km | 
| Overload Optical Power | C+ Module : -12.0 dBm | 
| Extinction Ratio | 8.2 dB | 
| Device Specifications | |
| Dimensions (W x D x H) | 22.86 mm x 237.00 mm x 395.40 mm | 
| Power Consumption and Maximum Frame Size | |
| Power Consumption | H802GPBD : Static: 45 W, Maximum: 51 W H805GPBD : Static: 43 W, Maximum: 49 W  | 
| Maximum Frame Size | For V800R011C00 and earlier versions: 2000 bytes For V800R012C00 and later versions: 2004 bytes  | 
| Operating temperature | -25°C to +65°C | 
Comparison of MA5600T Series OLT GPON service board
| Specification | H802GPBD | H805GPBD | H802GPFD/H805GPFD | H806GPBH/H807GPBH | 
| Port quantity | 8 | 8 | 16 | 8 | 
| MAX Split ratio ( B+) | 1: 64 | 1: 64 | 1: 64 | 1: 64 | 
| MAX Split ratio (C+/C++) | 1:128 | 1:128 | 1:128 | 1:128 | 
| D-CMTS | No | No | No | No | 
| ONU-based shaping | No | Yes | Yes | Yes | 
| Optical performance monitor  (querying Rx optical power is not supported)  | 
Yes | Yes | Yes | Yes | 
| RSSI detection and controlled optical signal transmission of the optical module | Yes | Yes | Yes | Yes | 
| ONU-based rate limitation | √ | √ | √ | √ | 
| CAR group | √ | √ | √ | √ | 
| Temperature query and high temperature alarm | Yes | Yes | Yes | Yes | 
| Automatic power shutdown in case of a high temperature | Yes | Yes | Yes | Yes | 
| Maximum differential fibre distance (km) | 20 | 20 | 40 | 40 | 
| Maximum Number of Service Flows  Supported by the Board  | 
8184 | 8184 | 16368 | 8184 | 
| Maximum Number of MAC address  Supported by the Board  | 
32768 | 32768 | 32768 | 32768 | 
| Available DBA bandwidth (based on single port) (kbit/s) | 1238784 | 1238784 | 1238784 | 1238784 | 
| Number of T-CONT supported  by each GPON port  | 
1024 | 1024 | 1024 | 1024 | 
| Board supporting downstream FEC | Yes | Yes | Yes | Yes | 
| Board supporting upstream FEC | Yes | Yes | Yes | Yes | 
| Rogue ONT detection | Yes | Yes | Yes | Yes | 
| Number of ONUs supported by  a GPON port  | 
128 | 128 | 128 | 128 | 
| Number of GEM ports supported  by each board  | 
8192 | 8192 | 16384 | 8192 | 
| Number of GEM ports supported  by each GPON port  | 
3872 | 3872 | 3872 | 3872 | 
| Number of service ports supported  by each GEM port  | 
8 | 8184 | 8184 | 8184 | 
| HQoS (four levels) | × | × | H802GPFD: × | H806GPBH: × | 
| H805GPFD: √ | H807GPBH: √ | |||
| 9216-byte Jumbo frames | × | × | H802GPFD: × | H806GPBH: × | 
| H805GPFD: √ | H807GPBH: √ | |||
| Power budget supported by a GPON port | Class B+ (28.5 dB, mostly used), | |||
| Class C+ (32 dB long reach transmission) | ||||
| Class C++: 35 dB | ||||
| Minimum bandwidth supported by a T-CONT | 1 Mbit/s (in the minimum delay mode) | |||
| 128 kbit/s (in the maximum bandwidth usage mode) | ||||